What you will see
- Inverter off with ID161 or ID162
- Output capped at midday with ID167 Feed-in Limitation
Why it happens
Export limiting keeps the inverter from sending more to the grid than allowed. Remote commands can come through the monitoring portal.
Diagram
Off or capped on purpose
Shutdown
ID161 forced, ID162 remote. Someone switched it off.
Derating
ID165 remote, ID166 logic interface, ID167 export limit.
Fault?
No. Find out who set it and why.
What you can check yourself
- Ask whether anyone in the house or your installer switched it off
- Check whether export limiting was set at installation
What not to do
- Do not change export settings yourself
When to call us
- Confirm the export limit matches your net billing approval
- Check who has remote access
- Restore normal operation
Export limits and net billing
Export limits are often set while net billing is pending with FESCO or LESCO. We check your settings once approval comes through.
Send us
Event List photo and your net billing status